There are many ways to coil our climbing ropes. Just like climbing knots, though, each coil method has its own benefits and drawbacks. So, here are four different ways to coil a climbing rope along with a description of some circumstances when one coil method might prove a better option.

If we are belaying a climber from the top on a multipitch climb, and if that second climber is unable to make a hard move, we can help them past the point where they are stuck by using a haul assist. Here are four haul assists, from least complex (with limited assistance gained) to more complex and robust.

If we have a climbing rope loaded below us (maybe a climber is unconscious and weighting the rope), we may not be able to attach our rappel device, or even if our device was attached before the rope got loaded, being on a "fireman's belay" might keep us from moving down. Here is how we can descend a rope when it is pulled tight below us.

We introduced our kids to "projecting" a climbing route when they first started confronting routes they had considerable difficulty with. While there are many tactics that can help, we began their education by focusing on the climb at three levels of progressive detail and then setting a mindset that helped redefine success criteria based on which level of detail we were focused on for a particular attempt.

There is a lot of time and attention spent on climbing well and the climbing mindset, but what about the belayer? Particularly when on lead, belaying a climber can also be stressful, especially for those just starting out. How do we create a safe place to learn in a situation where mistakes aren’t normally acceptable? Here’s how we approached getting our new climbers (our kids) to lead belay.

Every May, we make videos on the mental side of climbing and adventure in recognition of National Mental Health Awareness Month. This video is about how the unknowns increase in complex environments thus increasing our risk. Reducing complexity, not of systems but of the number of times we go into truly highly complex environments, may be one way to reduce our overall risk across a lifetime of climbing

Every May, we make videos on the mental side of climbing and adventure in recognition of National Mental Health Awareness Month. In this video, we discuss the role audacity, or self-belief in the face of the unknown, plays in encouraging our climbing experiences and expeditions.

Every May, we make videos on the mental side of climbing and adventure in recognition of National Mental Health Awareness Month. In this video, we get into some of the psychological underpinnings that suggest we should look to empower the victims and participants of any climbing accident and rescue to help in the situation at hand but also better reduce residual PTSD.

Every May, we make videos on the mental side of climbing and adventure in recognition of National Mental Health Awareness Month. Today's video is about self-forgiveness is a key first step to opening ourselves up to learning and improvement.

When our mountaineering objective demands that we camp on a glacier, we need to consider objective hazards like seracs, rock fall, and crevasses. This video gets into those considerations as they relate to identifying a potential camp location and the methods we may use to ensure the location is safe.

When a crevasse is unavoidable and must be crossed on your glaciated mountain climb, the technique you and your team employ will often be dictated by circumstances. This video gets into three different procedures to be chosen and applied based on terrain slopes and crevasse sizes.

A “running belay,” a form of simul-climbing that is frequently used on snow climbs and climbs up glaciated peaks, helps mitigate certain risks, but it also adds new risks into the equation. Let’s talk about how a running belay is performed and what pros and cons result from employing this climbing tactic so that we can best decide when it may make sense to use.

As we continue our glacier travel series and before we get into more advanced movement techniques we first need to understand the fundamentals of moving as part of a group who are, literally, tied together.

As a climbing team on a glacier, we need to be prepared for a crevasse fall, but we also want to have the route planning and navigation skills to reduce the likelihood of having a crevasse fall. This video provides ideas on how to plan route paths that help avoid crevasses.

Deciding how much climbing rope you need for glacier travel is a product of many factors. The number of teammates, the snow conditions, crevasse sizes, and preferred rescue systems are all inputs into how much space to have between climbers, how much length to keep in spare coils, and whether to have brake knots in the rope. All of that will calculate out to your total rope length. Let’s explore some of these considerations.

In this next episode of our glacier travel series, we are presenting several options for climbers to tie into the rope and how we may choose to match our tie-in setups to our circumstances, gear, and position on the rope.

Continuing our glacier travel series, we are showing the 6:1 drop loop crevasse rescue haul system and discussing how to modify it to meet some of the gear we may have, the rope we have available, and the status of the fallen climber.

As we get deeper into a glacier travel series, we want to note that there are many effective ways to develop our climbing systems for safe passage on glaciated mountains. Maybe the single biggest thing we can do wrong, however, is get dogmatic about those systems and assume that, while risks change from glacier to glacier, our systems don't have to change as well.

We will frequently choose to connect ourselves to the climbing rope with a carabiner, rather than a knot, when on a glacier in order to facilitate things like crevasse rescue systems. We need to be considerate of the strengths and weaknesses of carabiner types in order to select the best carabiner for our climb of a glaciated peak. Here's some of the criteria I use to help me choose.

We isolate damaged sections of a climbing rope by tying a knot with the damaged section in the knot bight. That keeps any load - you - off of the damaged section. But if we need to rappel past a damaged section, we need to be able to get our rappel setup from above that knot to below it while staying firmly and safely connected to the rope. Here is a procedure to do that.